The MOT Test
NOTE: The Driving Standards Agency (DSA) and Vehicle and Operator Services Agency (VOSA) merged in April 2014 to form the Driver and Vehicle Standards Agency (DVSA).
You must keep any vehicles driven on the road in a roadworthy condition. The MOT test checks that your vehicle meets road safety and environmental standards. It isn’t the same as having your vehicle serviced and doesn’t check its general technicianal condition.
The law requires that everyone who uses a vehicle on the road must keep it in a roadworthy condition at all times. Once a year, roadworthiness is checked in the interests of road safety and the environment by the test we know as the “MOT”.
The first test is required once a car is three years old. (There are different rules if you use it as a taxi or if it has more than 8 passenger seats). It should be clearly understood that the MOT is a minimum standard which your car should meet at all times; it is not a standard you should bring your car up to once a year.
The MOT looks at some important items on your car to see that they meet the key legal minimum requirements at the time of test. You should be aware that the MOT certificate is not a guarantee of the general technicianal condition of a vehicle.
Car & Van Components To Be Inspected For The MOT
Body / Vehicle Structure / General Items: Free from excessive corrosion or damage in specific areas. No sharp edges likely to cause injury. Towbars for security / condition / inappropriate repairs or modification. Correct operation of 13 pin electrical socket. Speedometer condition and operation. Engine mountings.
Fuel System: No leaks. Security and condition of pipes / hoses. Fuel cap fastens and seals securely. Note: the fuel cap will need to be opened. Make sure the key is available.
Exhaust emissions: Vehicle meets the requirements for exhaust emissions, dependent on the age and fuel type of the vehicle.
Exhaust system: Secure. Complete. Catalyst missing where one was fitted as standard. Without serious leaks and is not too noisy.
Seat belts: All the seat belts fitted are checked for type, condition, operation and security. All mandatory seat belts must be in place. Check of the Malfunction Indicator Lamp (MIL) for air bags and seat belt pre tensioners and load limiters.
Seats: Drivers seat for adjustment. All seats for security and seat backs can be secured in the upright position.
Doors: Latch securely in closed position. Front doors should open from inside and outside the vehicle. Rear doors should open from outside the vehicle. Hinges and catches for security and condition.
Mirrors: Minimum number required, condition and security. Indirect vision devices.
Load security: Boot or tailgate can be secured in the closed position.
Brakes: Condition including inappropriate repairs or modifications, operation and performance (efficiency test). Note the removal of the road wheels and trims are not part of the test. Anti-lock Braking System (ABS) and Electronic Stability Control (ESC) where fitted. Check of the dashboard Malfunction Indicator Lamp (MIL) for ABS, ESC, electronic park brake and brake fluid warning.
Tyres and wheels: Condition, security, tyre size/type and tread depth. Spare wheels and tyres are not inspected. Note: vehicles first used on or after 1 January 2012 - check of the MIL for Tyre Pressure Monitoring System (TPMS).
Registration plates: Condition, security, colour, characters correctly formed and spaced.
Lights: Condition, operation including High Intensity Discharge (HID) and Light Emitting Diode (LED) headlamps for cleaning, self leveling and security. Headlamp aim. Main beam warning light.
Bonnet: Securely latches in the closed position. Wipers/washers: Operate to give the driver a clear view ahead.
Windscreen: Condition and driver’s view of the road. Horn: Correct operation and of suitable type.
Steering and suspension: Condition, steering oil level, operation, a check for inappropriate repairs or modification including corrosion to power steering pipes or hoses. Operation of steering lock mechanism. Check of the MIL for electronic power steering and steering lock.
Vehicle identification number: Present on vehicles first used on or after 1 August 1980. A single VIN is displayed except on multistage build vehicles. (e.g. van conversion, BMW/Alpina etc.)
Electrical: Visible electrical wiring and battery.